Make Sure to Use Plenty of Epoxy

CrappyGluing
Originally uploaded by OzzyC.

After we cut the excess length off of the rear transom, we decided to test the strength of the epoxy. I figured a drop test would be the best way to get a guage of how strong our gluing job was, and I was concerned with the results.

I dropped the excess from about five feet, to see how well it would hold up to a shock. The results werent good. One of the four layers completely broke away. The second layer, as shown in this picture, split about 2/3 of the way through.

The moral of the story?? Use more glue than we did. In order to compensate for the lack of glue, we are going to reinforce the rear transom with several bronze screws. Were going to use bronze screws because they wont corrode over time.

Related Posts by Categories